>>Performance Curve >>Specifications >>Features




 


Model EK30
Type Air-cooled, 4-cycle, slant single cylinder,
OHV, horizontal PTO shaft
Bore x Stroke  mm(in.) 80×59 (3.15x2.32)
Piston displacement   ml(cu.in.) 296(18.06)
Continuous output
kW(HP)/rpm

5.5(7.4)/1800

Maximum output
kW(HP)/rpm
7.4(9.9)/1800
Maximum torque
N・m[kgf・m](lbf・ft)/rpm
42.0[4.28](30.98)/1250
Directon of rotation Counter clockwise as viewed from PTO shaft side
Fuel Automobile(unleaded)gasoline
Fuel Tank capacity
liter(US gal.)
6(1.59)
Lubricant Engine oil SAE 10W-30;class SE or higher
Lubrication Mechanical splashing type
Lubricationg oil capacity
liter(US gal.)
1.1(0.29)
lgnition system Transistorised
Spark plug TORCH E6TC
Governor Centrifugal flyweight type
Type of reduction 1/2 gear type
Air cleaner Dry type
Starter Recoil
Dry weight  kg(lb) 27
Dimension
length x width x height  mm(in.)
353×418.5×437 
*Specifications are subject to change without notice


High power engine (7.4kW / 1800rpm)
Powerful output from low- and mid-range speed
Excellent low- and mid- output characteristic which is required for farm machine.

Friendly to workers
Lowest noise in this class
By adopting two layered head cover, penetrating noise from cylinder head is reduced
Lowest vibration in this class
Uniaxial dynamic balancer realizes well balanced low vibration in all directions, which reduces vibration of handle frame. (Possible to install from 170cc class onward)
Light and easy recoil start
By adopting mechanical auto-decompression, required force of pulling recoil rope when starting is greatly reduced. Optimization of combustion method as well as ignition timing makes the engine start promptly.

Easy installation
Fulfilling variation of optional parts is
Offering the best matching engine specifications for customer's machine or their use by varied optional parts for air cleaner, muffler, fuel tank, and so on.